Our Location                                                                           Office Phone

3230 Industrial Way, SW | Suite B | Snellville, GA 30039       (800) 474-2490

    XRF Analyzers use low energy X-Rays to perform rapid non-destructive testing or screening for hazardous metals in paint and consumer goods. The gun-shaped instrument can be carried from place to place and materials large and small can be screened. All tests are numbered in series and stored along with time and date stamp, X-ray test spectrum, concentration, and user entered sample information. Easy data downloading to Windows based PC. Software allows for printing certificates of analysis.

    Hand-Held Lead in Paint Analyzers (Industrial)

    non-destructive test that takes only seconds. Accurate readings on any substrate without manual corrections are reported in units of mg/cm2 down to less than 0.5 mg/cm2. Used for risk assessment, and to instantly determine work exposure during cutting, grinding, and removing painted materials. Lead in Paint analyzers can also be used as a qualitative screening tool for lead in toys and consumer products. Can be used to provide accurate parts-per-million (ppm) results on scraped and powdered samples.

    RoHS & Consumer Goods Screening

    Users can quickly separate materials into three groups based on the level of hazardous metals detection as follows:

    • High Level of Metals Detected (Fail)
    • Metals Not Detected (Pass)
    • Some Metals Detected (More Testing Required)

    Hand-Held Lead in Paint Analyzers (Residential-HUD)

    XRF analyzers for Lead in Paint that have been certified by HUD with a Performance Characteristic Sheet (PCS) can be used to certify lead in paint results on homes and apartments. Thse instruments have been use for years by lead inspectors to produce rapid, high quality results for HUD based lead inspections.

    Consumer Goods & RoHS/WEEE Analyzers

    XRF analyzers allow rapid throughput for screening materials for the presence of hazardous metals including Lead (Pb) and Cadmium (Cd) for regulatory compliance. The instruments are "smart" to work on a wide variety of materials such as plastics, painted metals, electronics and more. Built-in camera allows for aligning the test on specific features and photographically recording what was tested. For most items the results will allow the user to separate materials into three groups to quickly remove suspected items from inventory and keep "clean" items available.

    Because XRF analyzers use miniature x-ray tubes (NO Isotopes!) they can be transported without special requirements.

    EON provides everything needed for screening with the XRF instrument including; state instrument registration, instrument training and applications assistance! Application Training for Consumer Goods/RoHS WEE screening is available for an additional charge.

    Item # Description/Size Availability Qty Break Price Quantity