Whether constructing your own suspension tethers or adding spare parts we can supply all the items (and advice) needed for a successful HydraSleeve Sampler Installation. Below are the most frequently used accessory parts for quick reference.
HydraSleeve sampling installations require the use of a stainless steel reusable weight to pull the suspension tether into place in the well.
- Our 1.5-inch diameter Tether Weights are attached to the bottom of the suspension tether when the HydraSleeves are attached to the side of the tether.
- The 1-inch diameter Bottom Weights are used for most installations when the HydraSleeve is suspended from the bottom of the tether and the weight is attached directly to the bottom of the HydraSleeve.
- Top Weights are ued to compress the top of the HydraSleeve to within 1 foot of the bottom of the well.
- SS Weight Assemblies are used at the top of the SuperSleeve
Click Here to go to our complete list of Weights.
Snap Connectors and Zip-Ties are used on every Passive Sampler installation to attach samplers and weights to the tether and tethers to the well cap.
Suspension Rope or Cable
We recommend poly braided rope for all suspension tethers. Contact us for installation details when stainless steel cable is required.
Tether Winding Reel
Use this reel when retrieving HydraSleeves from the well to keep the tether tangle-free and dirt-free. Especially useful for stainless tethers. Click Here to go to our complete list of Reels.
Well Caps with Hanging Ring
We recommend attaching Suspension Tethers to the underside of the well cap. Our most popular caps are shown below and have a 1-inch ring for this purpose. Click Here for complete complete list of well caps.