Our Location Office Phone
3230 Industrial Way, SW | Suite B | Snellville, GA 30039 (800) 474-2490
Whether constructing your own suspension tethers or adding spare parts we can supply all the items (and advice) needed for a successful SuperSleeve Sampler Installation. *A 2-pc PVC Top Collar Assembly or 2-pc Top Collar Weight Assembly is REQUIRED for SuperSleeves.
Re-Usable Weights
SuperSleeve sampling installations require the use of a stainless steel reusable bottom weight to pull the suspension tether into place in the well.
•The 1-inch or 1.25-inch diameter Bottom Weights are used for most installations when the SuperSleeve is suspended from the bottom of the tether and the weight is attached directly to the bottom of the SuperSleeve.
• Our 1.5-inch diameter Tether Weights are attached to the bottom of the suspension tether when the SuperSleeve are attached to the side of the tether.
• Top Collars Weights (2-piece) is an option used to compress the top of the SuperSleeve within 1.5 feet of the bottom of the well.
*Click Here to go to our complete list of Weights.
Snap Connectors and Zip-Ties are used on every Passive Sampler installation to attach samplers and weights to the tether and tethers to the well cap.
We recommend poly braided rope for all suspension tethers. Contact us for installation details when stainless steel cable is required.
Use this reel when retrieving SuperSleeves from the well to keep the tether tangle-free and dirt-free. Especially useful for stainless tethers. Click Here to go to our complete list of Reels.
We recommend attaching Suspension Tethers to the underside of the well cap. Our most popular caps are shown below and have a 1-inch ring for this purpose. Click Here for complete complete list of well caps.